Auto Filling Selector

Auto filling selectors provide the ideal solution for simple and effective storage management. Theses units co-ordinate the low of air in the filling station automatically between the compressor, the storage and the filling panel. The user simply connects the empty cylinders to the filling panel and opens the cylinder valves. The compressor, storage and auto filling selector can be located remotely from the filling panel with only one HP line between the auto illing selector and the filling panel. In addition to simpliied filling operations, the auto filling selectors also save energy and time making the filling operation more economical. Once the compressor is switched on, it will not switch off until all the cylinders that are connected on the filling panel are filled and the storage bank is reilled to maximum working pressure. The compressor runs continuously during the entire filling operation and therefore more eficiently.

The auto filling selectors are available in 3 versions

Pneumatic
For applications where the storage pressure is at least 30 bar above the max filling pressure on the illing panel and a pressure reducing station is already available between the storage and the filling panel. 30 x 27 x 10 cm, 3 kg

Pneumatic with integrated pressure reducing station
For applications where the storage pressure is at least 30 bar above the max illing pressure on the illing panel and a pressure reducing station is also required to safely reduce and secure the pressure from storage to illing pressure. 55 x 35 x 15 cm, 9 kg

Pneumatic-electronic
For applications where the storage pressure is the less than 30 bar higher
than the max. illing pressure on the illing panel.
43 x 26 x 10 cm, 16 kg
Options
>> Auto start signal for the compressor